⑶There are air bladder on the edge of the glass open the silicone vacuum bag too early

Breakdown Analysis of EVA Vacuum Glass Laminating Machine

(Notes: the following is a general guide, there is no guarantee that
they are all correct or suits your laminating machine. )

Unusual broken Reason solution

⑴Some part of film do not dissolve inside the finished laminated glass
heating not average, circle wind is not big enough, blower wire
connect wrong ①change the blower wire
②adjust the blower
③prolong the high temperature keeping time

⑵there are air bladder on the surface of the finished laminated
glass ①4 corner did not stick steady. ①stick 4 corners well
②Silica vacuum bag is leaking ②amend the silicone vacuum bag
③Vacuum pipe did not connect well ③check the vacuum pipe
④vacuum indicator do not reach the low point ④change the oil of the vacuum pump
Glass not flat enough Use better quality of glass

⑶There are air bladder on the edge of the glass
open the silicone vacuum bag too early
⑷Machine start switch get to stop from time to time Machine get wet or
there is water in it Air-dry it
⑸cannot process as setting program ①the electricity wire loose
①connect the wire well
②temperature and timing indicator broken ②Adjust the temperature
indicator and calculator graph
(6)Heating the machine too slow Heating elements broken Adjust the
current indicator, change the heating element

(Notes: the knowledge here is a general guide, there is no guarantee
that they are all correct or suits your laminating machine. )

Copyrights:
UCOLIN SILICONE TECH
(1)-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy
Glass Laminating
(2)-Silicone Sheet for EVA Glass Laminating Machine
(3)-Silicone Bag for PVB Glass Laminating Auto-clave
(4)-Silicone Rubber Sheet for Solar Cell Module Laminating Machine
(5)-Contact Us: uc@ucolin.com / www.ucolin.com
umewe360@gmail.com/ umewe360@hotmail.com

EVAFORCE® MENU

Architectural EVAFOFCE® INTERLAYER FILM WHITE EVA INTERLAYER FILM COLOR EVA INTERLAYER FILM

EVA Film for Laminated Glass

Eva Film laminated glass safety glazing 04

Eva Film laminated glass safety glazing 05

Eva Film laminated glass safety glazing 06

Eva Film laminated glass safety glazing 07

Eva Film laminated glass safety glazing

Published by

cnc@cncGlass.com EVA film glass interlayer

To order, please contact Peter Lin Mail: cnc@cncGlass.com Whatsapp: 0086 15013829504 https://www.cncglass.com/eva-film/ Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges www.cncGlass.com www.cncEva.com www.cncnext.com https://www.cncglass.com/green-tape/