HOWTO INSTALL BUSBAR OF SMART GLASS PRIVACY FILM

HOWTO INSTALL BUSBAR OF SMART GLASS PRIVACY FILM
WWW.CNCNEXT.COM WWW.HELLOGLASS.COM Peter Shin
You can DIY the busbar by yourself, following is instruction. If you
have doubts, please feel free to contact us. cnc@cncnext.com
Cut a piece out of one angle of UP side of smart film.(The length of
the cut is about 30% of the smart glass film)
Cut a piece out of one angle of UP side of smart glass film
Cut PET out of one angle of DOWN side of smart glass film
Use the ethanol to wash the cuts in both side
Use the ethanol to wash the cuts in both side
Use ethanol to wash the cuts in both side of smart glass film until
it is clean
Pepare the conductive glue (if it’s too dense, you can use 99%
ethanol to dilute conductive glue)
Draw conductive glue onto the cut on both sides of smart glass film.
Make sure the conductive glue not touch the un-cut smart film edges
Draw conductive glue onto the cut
Draw conductive glue onto the cut
Draw conductive glue onto the cut. Make sure the conductive glue not
touch the UNCUT smart glass film edges
Use dryer to dry the conductive glue
Put the copper tape onto the conductive glue
Put the copper tape onto the conductive glue
Put the copper tape onto the conductive glue
Put the copper tape onto the conductive glue, make sure the copper
of one side is longer to be bent on to the other sizde, so we can
soldering both electrodes on same side
Put the copper tape onto the conductive glue, make sure the copper
of one side is longer to be bent on to the other sizde, so we can
soldering both electrodes on same side
Put the copper tape onto the conductive glue, make sure one copper
of one side is longer to be bent on to the other sizde, so we can
soldering both electrodes on same side
Soldering both electrodes on same side
Use insulating tape to seal the busbar
Use insulating tape to seal the busbar
Connecting with power device and turn on the switch, you will see
the smart film is transparent
“Turn off the switch, you will see the smart film is frosted. Now
you have finished installing the busbar of smart glass film.
Congratulations!

If you have doubts, pleae feel free to contact Peter at this Email
address: cnc@cncnext.com
“SMART GLASS FILM is composed by two transparent conductive film
laminating with a polymer liquid core. And the polymer liquid core
composes crystal ball and polymer. When the light pass through the
SMART GLASS FILM and reach the liquid crystal ball and polymer, the
light is scattering. And the SMART GLASS FILM appears translucent.
When electricity power is connected, the polymer-liquid crystal core
is allowing light pass through, the SMART GLASS FILM appears
transparent.”
“All rights reserved by CNC-INTERLAYER TECH:
【1】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【2】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Web: www.CNCnext.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

HOWTO INSTALL BUSBAR OF SMART GLASS PRIVACY FILM.pdf Download this file

EVAFORCE® MENU

Architectural EVAFOFCE® INTERLAYER FILM WHITE EVA INTERLAYER FILM COLOR EVA INTERLAYER FILM

EVA Film for Laminated Glass

Eva Film laminated glass safety glazing 04

Eva Film laminated glass safety glazing 05

Eva Film laminated glass safety glazing 06

Eva Film laminated glass safety glazing 07

Eva Film laminated glass safety glazing

Published by

cnc@cncGlass.com EVA film glass interlayer

To order, please contact Peter Lin Mail: cnc@cncGlass.com Whatsapp: 0086 15013829504 https://www.cncglass.com/eva-film/ Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges www.cncGlass.com www.cncEva.com www.cncnext.com https://www.cncglass.com/green-tape/