Procedure Instruction of Pre-Laminating Polyvinyl Butyral PVB Interlayer Film

Procedure Instruction of Pre-Laminating Polyvinyl Butyral PVB Interlayer Film
All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force EVA INERLAYER FOR

ARCHITECTURAL LAMINATED GLASS eva@evafilms.com
【Product 2】CNC-SmartSMART FILM FOR PRIVACY

SWITCHABLE GLASS smartfilm@smartestglass.com
【Product 3】CNC-Shield PVB INTERLAYER FOR

AUTOMOTIVE WINDSHIELD GLASS pvb@pvbfilm.net
Web: www.CNCglass.com www.CNCnext.com

www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com
www.helloglass.com
www.cncnext.com
1.
Clean the glass, better use the softened water to clean the oil, dust,
flaw on the glass surface. Then dry the glass and put away in the
laminating room.

2.
When cutting the Polyvinyl Butyral PVB interlayer film according to
the glass, make sure the Polyvinyl Butyral PVB interlayer film only
2mm extra larger than the glass, or the too much extra Polyvinyl
Butyral PVB interlayer film will seal the laminated glass before all
the Polyvinyl Butyral PVB interlayer film is totally melted. 3.
Requirement of Pre-Laminating Room for Polyvinyl Butyral PVB interlayer film
Pre-laminating room’s environment is very important for manufacturing
successfully laminated glass with Polyvinyl Butyral PVB interlayer
film. There are some requirements:

+Install double doors, and the double doors not open at the same time
and better install wind-shower equipment in the middle of double
doors.

+The temperature inside the pre-laminating room should keep at 18-20
degrees and humidity at 20%-30%.

+Workers should wear antistatic suit, glove, hat.

+Regularly clean the equipments and pre-laminating room.
All rights reserved by CNC-INTERLAYER TECH:
【1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Mail: cnc@cncnext.com
Web: www.CNCnext.com
benext77@gmail.com/
benext77@hotmail.com

Polyvnyle_bytural_pvb_interlay

Procedure Instruction of Pre-Laminating Polyvinyl Butyral PVB Interlayer Film.pdf Download this file

Procedure_instruction_of_pre-l

EVAFORCE® MENU

Architectural EVAFOFCE® INTERLAYER FILM WHITE EVA INTERLAYER FILM COLOR EVA INTERLAYER FILM

EVA Film for Laminated Glass

Eva Film laminated glass safety glazing 04

Eva Film laminated glass safety glazing 05

Eva Film laminated glass safety glazing 06

Eva Film laminated glass safety glazing 07

Eva Film laminated glass safety glazing

Published by

cnc@cncGlass.com EVA film glass interlayer

To order, please contact Peter Lin Mail: cnc@cncGlass.com Whatsapp: 0086 15013829504 https://www.cncglass.com/eva-film/ Super clear eva film Outdoor white eva film series Green tape for laminating, heating resistant Thermal cutter trimming eva glass edges www.cncGlass.com www.cncEva.com www.cncnext.com https://www.cncglass.com/green-tape/